If you’re looking to Sell Progressive Electronics PROSCANNER Microscanner

OFFICE IDENTIFIER :
The Office Identifier function allows you to find the termination of an office cable drop from a wiring closet. By inserting the Office Identifier adapters into office wall outlets, PROSCANNER can identify office locations at the patch panel. The Office Identifier plugs are included in the (OPTIONAL) Twisted Pair Office Identifier accessory kit. They are uniquely numbered from 1 to 12. The Wiremap Adapter may also serve as an Office Identifier Plug and will be displayed as OFFICE 4.

WIREMAPPER :
The Wiremap function tests twisted-pair cabling for proper wiring. Your cabling configuration is checked for shield continuity, opens, shorts, crossed pairs, split pairs, and reversed pairs. Test results are displayed as a numeric representation, where the upper line of fixed digits shows the detected wires at the PROSCANNER jack, and the lower line of digits indicates the actual wiring. This function requires the use of the Wiremap Adapter at the far end.

LENGTH TESTER :
The Length function measures the full length of a cable. If you are measuring standard pair length, PROSCANNER will determine whether the cable is open, shorted, or connected to a hub.

TONE GENERATOR :
Toner is a cable tracing function that assists in tracking cables hidden in walls, ceilings, floors, or patch panels by generating four distinct multi-tone signals that can be received by a cable tracer. To trace a cable, use an inductive amplifer (Progressive Electronics models 200B, 200EP or 200FP)(WHICH ARE OPTIONAL) or any equivalent tracing device, to convert a signal on the cable into an audible tone. To determine the cable path, simply trace along the wire using the audible tone as a guide. The tracer needs to be within one foot of the hidden cable. You may select one of four different tone sequences, displayed as the numbers 1-4 on the LCD.

TECHNICAL SPECIFICATIONS :

Dimensions :

PROSCANNER :
13.97 cm x 8.25 cm x 2.54 cm (5.5″ x 3.25″ x 1″)

Wiremap Adapter/Office Identifier :
5.72 cm x 1.27 cm x 2.54 cm (2.25″ x .5″ x  1.0″)

Ground pin receptacle size :         2.03 mm (.08″)

Weight :

PROSCANNER :    171.54 g (.38 lbs)

Wiremap Adapter/Office Identifier :    9.03 g (.02 lbs)

Power Source:        9 V Alkaline battery

USER INTERFACE :

Display :        Custom LCD

Size :        4.42 cm x 2.15 cm (1.75″ x .85″)

Keypad :        Four momentary contact keys.

ENVIRONMENTAL :

Operating Temperature :       0°to 50°C (32°to 122°F)

Storage Temperature :        -10°to 55°C (14°to 131°F)

Humidity :        10% to 90% non-condensing.

Buying, Selling, Trading Progressive Electronics PROSCANNER

APPLICATIONS :

Shielded and unshielded twisted pair cable.

TEST INTERFACE :

MAIN :

Modular 8 connector for length, wiremap,
office identifier, trace.

Loopback: Modular 8 connector for Cat5 patch cable.

WIREMAPPING :

CALIBRATION :

User selectable NVP

NVP calculation based on known cable
Length.

MINIMUM LENGTH :        15 meters (50 feet)

MAXIMUM LENGTH :      457 meters (1500 feet)

PATCH CABLE WIREMAPPING :

The Wiremap function can also be used to verify Cat5 patch cables.

INCLUDES :
– Progressive Electronics PROSCANNER Network Cable Tester
– Progressive Electronics PROSCANNER Wiremap Adapter
– Cat5 Patch Cord
– Hard Copy Getting Started Guide
– Soft Carrying Case
If you’re selling your Progressive Electronics PROSCANNER please fill out form on the right hand side of page.