Current post: Selling Fluke Microtest MicroScanner – We Buy New Used Microtest MicroScanner (‘s) Top Dollar Paid!

Selling Fluke Microtest MicroScanner – We Buy New Used Microtest MicroScanner (‘s) Top Dollar Paid!

If you’re looking to Sell Microtest MicroScanner 10/100 Cable Verifier

Product Capabilities

“The essential all-in-one network tester”

The Microscanner TDR checks length, wiremap, continuity, opens, shorts and crossed and split pairs.It also generates multiple tones for use with a cable tracer. The optional office identifier kit is used when patch panel prots or wall jacks are unmarked.

The Microscanner Toner function allows to generate tones to locate hidden cables in walls, ceilings; or identify one in a bundle. An optional probe such as our Intellitone or equivalent is required to detect the tones.

Specifications:

Power Source

  • Battery: 9-Volt alkaline battery
  • Low battery: Low battery indication on display

Environmental

  • Operating Temperature: 0° to 50° C (32° to 122° F)
  • Storage Temperature: -10° to 55° C (14° to 131° F)
  • Humidity: 10 to 90% non-condensing User Interface
  • Display: Custom LCD, 1.75” x .85”
  • Keypad: 4 button keypad

Buying, Selling, Trading Microtest MicroScanner

Applications

  • Shielded and Unshielded Twisted Pair cable

Test Interface

  • Main: Modular 8 connector for length, wire map, office identifier, toner
  • Loopback: Modular 8 connector used for patch cable wire map

Length

  • Measures length on all 4 pairs and displays in feet or meters Checks for opens, shorts and connections to a HUB (10BaseT / Token Ring)
  • Maximum length: 1500 ft. (457m)
  • Resolution: 1 ft.

Length Calibration

  • Modes:
    • User Selectable NVP
    • NVP Calculation based on known cable length:
      • Minimum length: 50 ft. (15 m)
      • Maximum length: 1500 ft. (457m)

Wiremap

  • Wiremap checks end-to-end continuity on all four wire pairs (Wiremap adapter required)

Faults detected:

  • Opens
  • Shorts
  • Reversed pairs
  • Swapped pairs
  • Split pairs
  • Distance Maximum length: 656 ft. (200 m)

Office Identifier
Identify cable links from the wiring closet to the office using the optional Office Identifier plugs

  • 12 passive test plugs attached to far end (identified as 1 through 12)
  • Requires minimum 12/36 or 36/45 pairs in cable
  • Distance Maximum length: 656 ft. (200 m)

Toner
Generate audible frequency tones detectable by standard tracer probes

  • Frequency: User may select 1 of 4 predefined tone sequences
  • Interface: Main Mod8 port for tone generation on all 4 pairs. Ground jack provided for grounding MICROSCANNER during trace operations.

High Voltage Input/Protection:

  • The test interface withstands input hazard conditions that arise from normal telephone interfaces (48 VDC at less than 80 mA) or 24 VAC power used to power many telephone keysets.

If you’re selling your Microtest MicroScanner please fill out form on the right hand side of page.